solar monitoring
How to Read Your Solar Monitoring App
By BC Solar Solutions · · Updated · 5 min read

In this article
Many home solar systems come with an app or web portal that shows what the panels are doing. It lets you keep an eye on equipment you can't see from the driveway, but the screens can be confusing at first.
Here's what the main numbers mean, why they move around, and what to do when something looks off. Every brand's app is different, so the examples below come from the support pages of Enphase, SolarEdge and Tesla.
Power vs. energy: kW and kWh
These two units measure different things.
- Kilowatts (kW) measure power. The U.S. Energy Information Administration (EIA) explains that watts measure power at a specific moment. A live, right-now reading is a power reading.
- Kilowatthours (kWh) measure energy. EIA uses watthours to measure how much electricity is used over a period of time, and it defines one kWh as one kilowatt generated for one hour. Tesla's support pages note that solar production, and energy to and from the grid, are measured in kilowatthours.
In short: kW is how fast, kWh is how much.
What the main screens show
Production
Production is the electricity your panels make. The U.S. Department of Energy's guidance for solar systems at federal sites says monitoring should be able to report energy production hourly, daily, monthly and annually. The Department of Energy also notes that the greatest amount of solar energy reaches the Earth around solar noon, so on a clear day many systems peak around midday.
Consumption
Some apps also show how much electricity your home uses, but that takes extra hardware. Enphase says full energy insights require production and consumption CTs (current transformers). SolarEdge says that if no SolarEdge meter is installed, only production is displayed. Tesla notes that some solar systems don't have a site meter to show home and grid usage. If your app shows production only, ask your installer about consumption monitoring.
Grid imports and exports
When your app tracks consumption, it may also show energy moving to and from the grid. Enphase describes imported and exported energy as energy exchanged with the grid.
Those numbers connect to your bill. The California Public Utilities Commission explains that under net energy metering, customers receive bill credits for excess generation exported to the grid, and that under its net billing tariff, compensation for exported generation is applied to the customer's bill. Tesla also points out that a utility meter only tracks energy leaving or entering the grid, so your utility bill will look different from the production shown in the app.
A panel-by-panel view
If your system has microinverters or power optimizers, your app may show each panel. The Department of Energy explains that microinverters are smaller inverters placed on every panel, and a 2018 maintenance guide from the National Renewable Energy Laboratory (NREL) notes that microinverter and power optimizer platforms can show data module by module. In the Enphase app, the Array tab shows status and performance for each panel.
If one panel reads lower than its neighbors day after day, it's worth asking why. Tesla's support pages say shade significantly reduces production, so look for a new shadow first. An equipment problem is another possibility, and that one is for your installer.
Why your numbers go up and down
Day-to-day swings are normal. The Department of Energy lists what changes how much solar radiation reaches a spot: geographic location, time of day, season, local landscape and local weather. EIA adds that clouds, dust and pollution in the atmosphere affect how much sunlight reaches the surface.
So compare like with like. A cloudy day next to a clear one tells you very little. Compare a clear day with another clear day. Season matters too, and we cover that in what to expect from solar panels in winter.
When the numbers look off
The app stopped updating
A blank graph doesn't always mean your panels stopped working. Enphase says losing data doesn't necessarily mean your system isn't producing, and that a "Gateway Not Reporting" message means the gateway has lost its internet connection and is no longer sending system data. SolarEdge says production and communication are handled separately, so a problem with one won't affect the other.
Start with the simple checks: make sure your home Wi-Fi is connected to the internet, and think about whether you recently changed your router or its password, which SolarEdge asks about. If the app still isn't updating, contact your installer.
Production dropped or you got an alert
Enphase notes that its app will often alert you to issues, and that small ones, like a device going offline or a drop in production, can go unnoticed without regular checks. SolarEdge adds that not every error code means a production problem.
If production drops and the weather doesn't explain it:
- Look at the panels from the ground. Check for new shade, like a tree that's grown, and for droppings or heavy dust on the glass. Tesla's support pages suggest hiring a local solar panel cleaning service if you have excessive soiling, such as bird droppings.
- Don't open or touch the equipment. Tesla warns not to disconnect wires or open electrical panels, and SolarEdge says not to attempt repairs on the inverter or power optimizers without a SolarEdge-certified installer or electrician.
- Call your installer for anything electrical. SolarEdge's guidance is to contact your installer if there's an issue with your system's production.
Where cleaning fits in
If your installer rules out an equipment problem and the glass is dusty or spotted with droppings, book a cleaning.
We clean with deionized pure water and soft brushes, with no harsh chemicals. A typical home takes about two hours, and each cleaning comes with an inspection plus a report. Learn more about our residential solar panel cleaning. Our quarterly and biannual maintenance plans, with optional monthly inspections, keep cleanings on a schedule. See our maintenance plans.
Frequently asked questions
What's the difference between kW and kWh in my solar app?
Kilowatts (kW) measure power at a moment. Kilowatthours (kWh) measure energy over time, and your production totals are measured in kWh.
Why doesn't my app show how much electricity my home uses?
It needs extra metering, such as consumption CTs or a site meter. Ask your installer what your system has.
My app says "not reporting." Are my panels broken?
Not necessarily. Enphase and SolarEdge both say a communication problem doesn't by itself mean your system stopped producing. Check your home internet first, then contact your installer.
Why doesn't my utility bill match my app?
Tesla explains that your utility meter only tracks energy leaving or entering the grid, not everything your panels produce, so your bill will look different from the production total in your app.
Questions about your panels?
We're BC Solar Solutions, family-owned since 2018 and fully insured. We offer same-day or next-day appointments, and satisfaction is guaranteed. Get a free quote or call (888) 875-6235.
